Airengine5761-10wd 50084425 Host (11ax Indoor Type,2+2 Dual Frequency,Built-in Antenna)

AirEngine 5760-22WD is a remote unit (RU) in compliance with the Wi-Fi 6 standard. With mounting brackets, the RU can be easily adapted to junction boxes (86/118/120 mm) and wall-mounting scenarios. The RU uses built-in smart antennas to ensure always-on Wi-Fi signals for users, significantly enhancing users' wireless network experience. It is ideal for scenarios with high-density rooms, such as hotel guest rooms, student dormitory rooms, and hospital wards.

• The dual-radio mode is supported with 2x2:2 MIMO on 2.4 GHz and 4x4:4 MIMO on 5 GHz
• Uplink: 1 x 2.5GE electrical port + 1 x 10GE SFP + optical port; downlink: 4 x GE electrical ports + 2 x RJ45 passthrough ports
• Mounting on a junction box or wall, facilitating deployment
• Built-in smart antennas that automatically adjust the coverage direction and signal strength based on the intelligent switchover algorithm to adapt to the application environment change, and provide accurate and stable coverage as STAs move
• USB port for IoT expansion
• Bluetooth serial interface-based O&M through the built-in Bluetooth module by collaborating with CloudCampus APP; collaboration with a location server to accurately locate Bluetooth terminals and tags Basic information about the AirEngine 5760-22WD

  Item	Details
  Description	AirEngine5761-10WD host (11ax indoor type,2+2 dual frequency, built-in antenna)
  Part Number	50084425
  Model	AirEngine 5761-10WD
  subseries	AirEngine 5700
  First supported version	V200R020C01

  
  

  1	PASS-THRU	2	GE1~GE4
  3	GE0/PoE_IN	4	DC 12V

  Technical Specifications

  Item	Specification
  Installation Type	Wall Junction Box
  Dimensions without packaging (H x W x D) [mm(in.)]	74 mm x 170 mm x 86 mm (2.91 in. x 6.69 in. x 3.39 in.)
  Weight without packaging [kg(lb)]	0.70 kg (1.54 lb)
  Storage	NAND Flash 512 MB; NOR Flash 16 MB
  Console port	BLE console
  Maximum power consumption [W]	25.29 (excluding USB and PoE OUT ports)
  Maximum heat dissipation [BTU/hour]	86.3 (without USB and PoE OUT)
  Power supply mode	DC adapter PoE
  Rated input voltage [V]	48 V
  Input voltage range [V]	DC: 43.2 V to 57.6 V PoE: 802.3bt/at
  Service port surge protection [kV]	PoE port: Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B Common mode (8 wires to ground): 6 kV (1.2/50 us, 42 ohms), criterion B
  Maximum PoE output power [W]	13.6 W (When the maximum transmission distance through a CAT5E Ethernet cable is 40 m, the port can connect to an 802.3af-compliant PD requiring power of less than 12.95 W.)
  Maximum number of physical ports on the entire device	2.5GE (RJ45) x 1, 10M/100M/1000M/2.5GE auto-sensing GE (RJ45) x 4, 10M/100M/1000M auto-sensing 10GE optical port (SFP+), GE/10GE auto-sensing
  Long-term operating temperature [°C(°F)]	0°C to 40°C (32°F to 104°F) (If the altitude is in the range of 1800 m to 5000 m, the temperature decreases by 1°C or 1.8°F every time the altitude increases by 300 m.)
  Storage temperature [°C(°F)]	–40°C to +70°C (–40°F to +158°F)
  Long-term operating relative humidity [RH]	5% RH to 95% RH
  Long-term operating altitude [m(ft.)]	–60 m to +5000 m (–196.85 ft to +16404.20 ft)
  Atmospheric pressure [kPa]	53kPa - 106kPa ETSI 300 019-2-3
  Ground	floating ground
  USB	USB 2.0
  IoT slot	IoT extension by USB
  BLE	BLE5.0
  Radio number	2
  Operating frequency band	ghz2.4 ghz5
  MIMO spatial streams	Radio 0 (2.4 GHz): 2x2 Radio 1 (5 GHz): 4x4
  Wi-Fi standard	2.4G: 802.11b/g/n/ax 5G: 802.11a/n/ac/ac Wave 2/ax
  Radio interface	Built-in smart antennas
  Antenna gain	2.4G: 4 dBi 5G: 5 dBi Bluetooth: 4 dBi
  Maximum transmit power	2.4G: 23 dBm 5G: 26 dBm (Note: This is the total MIMO radio power, the same as: 2.4G: 20 dBm/chain 5G: 20 dBm/chain) Bluetooth: < 10 dBm
  Singal radio transmit power [dBm]	2.4G: -10 dBm to 20 dBm/chain 5G: -10 dBm to 20 dBm/chain
  MTBF [year]	year37
  MTTR [hour]	hour0.5
  Frequency stability [ppm]	+/-20
  802.3bt power supply description	Wi-Fi: If no optical port is used, Wi-Fi is not restricted. If optical ports are used, Wi-Fi supports only the 2.4 GHz (2x2, 20 MHz bandwidth) + 5 GHz (2x2, 80 MHz bandwidth) working mode, and the radio transmit power is not affected. Wired network port: The 2.5GE electrical port and SFP+ optical port work as combo ports. When one of them is working, the other is unavailable. The four downlink ports are all available. Other ports: not restricted
  802.3at power supply description	Wi-Fi: If the USB and PoE out ports are not used and only the 2.5GE electrical port is used as the uplink port, Wi-Fi supports the 2.4 GHz (2x2, 20 MHz bandwidth) + 5 GHz (4x4, 80 MHz bandwidth) working mode, and the radio transmit power is not affected. If an optical port or the 2.5 W USB port is used, Wi-Fi supports only the 2.4 GHz (2x2, 20 MHz bandwidth) + 5 GHz (2x2, 80 MHz bandwidth) working mode, and the radio transmit power is not affected. Wired network port: The 2.5GE electrical port and SFP+ optical port work as combo ports. When one of them is working, the other is unavailable. The four downlink ports are all available. Other ports: Only the 2.5 W USB port is supported. The 5 W USB port and PoE OUT port are unavailable.
  802.3af power supply description	The 802.3af power supply is not supported.
  DC power supply description	Wi-Fi: If no optical port is used, Wi-Fi is not restricted. If optical ports are used, Wi-Fi supports only the 2.4 GHz (2x2, 20 MHz bandwidth) + 5 GHz (2x2, 80 MHz bandwidth) working mode, and the radio transmit power is not affected. Wired network port: not restricted Other ports: not restricted