02353vux Airengine6761-21(11ax Indoor,4+4 Dual Bands,Smart Antenna,Usb,Ble,Scan)
Basic information about the AirEngine 6761-21
| Item | Details |
|---|---|
| Description | AirEngine6761-21(11ax indoor,4+4 dual bands,smart antenna,USB,BLE,Scan) |
| Part Number | 02353VUX |
| Model | AirEngine 6761-21 |
| subseries | AirEngine 6700 |
| First supported version | V200R021C00 |
1 | Security slot | 2 | 2.5GE/PoE_IN |
3 | DC 48V | 4 | USB |
5 | SFP+ | - | - |
Ports on the AirEngine 6761-21
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| 2.5GE/PoE_IN | RJ45 | 100M/1000M/2.5G auto-sensing Ethernet electrical port that connects to the wired Ethernet and supports PoE input. | Network cable |
| SFP+ | SFP+ | Ethernet optical port, supporting 1 Gbit/s or 10 Gbit/s auto-sensing and working with a matching optical module. It supports PoE input. When a PSE supplies power to the AP through this port, the matching hybrid cable and hybrid module must be used. | Optical module |
| DC 48V | DC connector | DC power port, used to connect to a 48 V power adapter. | 48 V DC power adapter |
| USB | USB 2.0 Type A | Connects to an IoT terminal to implement IoT applications. | IoT module |
Technical Specifications
| Item | Specification |
|---|---|
| Installation Type |
|
| Dimensions without packaging (H x W x D) [mm(in.)] | Diameter x length: 220 mm x 53 mm (8.66 in. x 2.09 in.) |
| Dimensions with packaging (H x W x D) [mm(in.)] | 93 mm x 284 mm x 251 mm (3.66 in. x 11.18 in. x 9.88 in.) |
| Weight without packaging [kg(lb)] | 1.22 kg (2.69 lb) |
| Weight with packaging [kg(lb)] | 1.76 kg (3.88 lb) |
| Storage | NAND Flash 512 MB |
| Console port | BLE console |
| Maximum power consumption [W] | 22.6 (excluding USB) |
| Maximum heat dissipation [BTU/hour] | 77.1 (without USB) |
| Power supply mode |
|
| Input voltage range [V] | DC: 42.5 V to 57 V PoE: 802.3at/af |
| Service port surge protection [kV] | PoE port: Differential mode (48 V-RTN): 0.5 kV (1.2/50 us, 42 ohms), criterion B Common mode (8 wires to ground): 6 kV (1.2/50 us, 42 ohms), criterion B |
| Relationship between PoE and system power modules [W] | The AP can be powered by DC or PoE over an Ethernet cable or hybrid cable. The power supply modes do not have priorities and do not support hot backup. |
| Maximum number of physical ports on the entire device | 2.5GE (RJ45) x 1, 100M/1000M/2.5GE auto-sensing 10GE (SFP+) x 1, 1000M/10GE auto-sensing Either the 2.5GE electrical port or SFP+ optical port can be used for data communication at the same time. If both ports are connected, the optical port is preferentially used for communication. |
| Long-term operating temperature [°C(°F)] | –10°C to +50°C (14°F to 122°F) (If the altitude is in the range of 1800 m to 5000 m, the temperature decreases by 1°C or 1.8°F every time the altitude increases by 300 m.) |
| Storage temperature [°C(°F)] | –40°C to +70°C (–40°F to +158°F) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH |
| Long-term operating altitude [m(ft.)] | –60 m to +5000 m (–196.85 ft to +16404.20 ft) |
| Atmospheric pressure [kPa] | 53kPa - 106kPa ETSI 300 019-2-3 |
| Ground | floating ground |
| USB | USB 2.0 |
| BLE | BLE5.0 |
| Radio number | 2 |
| Operating frequency band |
|
| MIMO spatial streams | Radio 0 (2.4 GHz): 4x4 Radio 1 (5 GHz): 4x4 |
| Wi-Fi standard | 2.4G: 802.11b/g/n/ax 5G: 802.11a/n/ac/ac Wave 2/ax |
| Radio interface | Built-in Dynamic-Zoom Smart Antennas |
| Antenna gain | 2.4G: 4.5 dBi/chain (peak value) 2 dBi (combined gain) 5G: 5.5 dBi/chain (peak value) 3 dBi (combined gain) BLE: 4 dBi |
| Maximum transmit power | 2.4G: 26 dBm (Max) 5G: 26 dBm (Max)
NOTE:
This is the MIMO total radio power, which is the same as: 2.4G: 20 dBm/chain (Max) 5G: 20 dBm/chain (Max) BLE: < 10 dBm |
| Singal radio transmit power [dBm] | 2.4G: -10 dBm to 20 dBm/chain 5G: -10 dBm to 20 dBm/chain |
| MTBF [year] | year69.7 |
| MTTR [hour] | hour0.5 |
| Frequency stability [ppm] | +/-20 |
| 802.3at power supply description | Wi-Fi:
Wired network port: Either the 2.5GE electrical port or SFP+ optical port can be used for data communication at the same time. If both ports are connected, the optical port is preferentially used for communication. |
| 802.3af power supply description | Wi-Fi: The number of MIMO spatial streams decreases to 2x2 on the 2.4 GHz frequency band, the maximum combined power is 23 dBm, and the 5 GHz frequency band is unavailable. Wired network port:
Other ports: The USB port is unavailable. |
| DC power supply description | Either the 2.5GE electrical port or SFP+ optical port can be used for data communication. If both ports are connected, the optical port is preferentially used for communication. |
1. More than 10 years of in-depth experience in the automotive field and technological innovation ability
2. Multi-brand, Full series. Achieve cooperation with many brands, and provide first-hand vehicle source.
3. The same demand, more abundant vehicle sources; the same product, more favorable price; the same price, shorter delivery time; the same delivery time, more convenient service
4. One-stop service. Vehicle export service capability, serve the whole process.
Q: How about your main products?
روابط سريعة
عنواننا
الطابق 5AF بالكامل، الغرفة 6F605، الطابق 30F بالكامل، مبنى xingguang Yingjing، رقم 119 طريق Shuiyin، منطقة Yuexiu، قوانغتشو.
جميع الحقوق محفوظة © 2024 للأمن. 