02353gsh-001 Airengine8760r-x1e(11ax Outdoor,Dedicated 3rd Radio,8+8 Dual Bands,External Antenna,Ble,Pse)
Basic information about the AirEngine 8760R-X1E
| Item | Details |
|---|---|
| Description | AirEngine8760R-X1E(11ax outdoor,Dedicated 3rd Radio,8+8 dual bands,external antenna,BLE,PSE) |
| Part Number | 02353GSH-001 |
| Model | AirEngine 8760R-X1E |
| subseries | AirEngine 8700 |
| First supported version | V200R021C10SPC100 |
1 | GE/PoE_OUT | 2 | 10GE/PoE_IN |
3 | Ground screw | 4 | Security slot |
5 | SFP+ | 6 | Antenna ports E to H |
7 | Antenna ports A to D | - | - |
Ports on the AirEngine 8760R-X1E
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| 10GE/PoE_IN | RJ45 | Ethernet electrical port that supports 100M/1000M/2.5G/5G/10G auto-sensing, connects to the wired Ethernet, and supports PoE input | Network cable |
| SFP+ | SFP+ | Ethernet optical port, supporting 1 Gbit/s or 10 Gbit/s auto-sensing and working with a matching optical module | Optical module |
| GE/PoE_OUT | RJ45 | Ethernet electrical port that supports 10/100/1000M auto-sensing and connects to the wired Ethernet | Network cable |
| Antenna port | N-Type Female | Connects to an external antenna for transmitting and receiving service signals, and supports dual-band (2.4 GHz + 5 GHz) antennas. | Antenna |
Technical Specifications
| Item | Specification |
|---|---|
| Installation Type |
|
| Dimensions without packaging (H x W x D) [mm(in.)] | Diameter x length: 165 mm x 387 mm (6.50 in. x 15.24 in.) |
| Weight without packaging [kg(lb)] | 4.05 kg (8.93 lb) |
| Storage | NAND Flash 512 MB; NOR Flash 16 MB |
| Console port | BLE console |
| Maximum power consumption [W] | 53.2 (excluding PoE OUT) |
| Maximum heat dissipation [BTU/hour] | 181.5 (without PoE OUT) |
| Power supply mode | PoE |
| Input voltage range [V] | PoE: 802.3bt |
| Service port surge protection [kV] | 6 kA in common mode |
| Maximum PoE output power [W] | 15.4 W |
| Maximum number of physical ports on the entire device | 10GE (RJ45) x 1, 10M/100M/1000M/2.5GE/5GE/10GE auto-sensing GE (RJ45) x 1, 10M/100M/1000M auto-sensing 10GE optical port (SFP+), GE/10GE auto-sensing |
| Long-term operating temperature [°C(°F)] | –40°C to +65°C (–40°F to +149°F) (If the altitude is in the range of 1800 m to 5000 m, the temperature decreases by 1°C or 1.8°F every time the altitude increases by 300 m.) |
| Storage temperature [°C(°F)] | –40°C to +85°C (–40°F to +185°F) |
| Long-term operating relative humidity [RH] | 0% RH to 100% RH |
| Long-term operating altitude [m(ft.)] | –60 m to +5000 m (–196.85 ft to +16404.20 ft) |
| Atmospheric pressure [kPa] | 53kPa - 106kPa ETSI 300 019-2-3 |
| Ground | Ground |
| Antenna port surge protection [KA] | 5 kA surge protection capability without external surge protection devices |
| Wind resistance | 67 m/s |
| BLE | BLE5.0 |
| Radio number | 2/3 |
| Operating frequency band |
|
| MIMO spatial streams | Dual-radio standard mode:
Triple-radio mode:
Dual-radio + independent radio scanning mode:
|
| Wi-Fi standard | 2.4G: 802.11b/g/n/ax 5G: 802.11a/n/ac/ac Wave 2/ax |
| Radio interface | External antenna |
| Antenna gain | BT: 5 dBi |
| Maximum transmit power | 2.4G: 33 dBm (Max) 5G: 33 dBm (Max)
NOTE:
This is MIMO total radio power, which is the same as: 2.4G: 24 dBm/chain (Max) 5G : 24 dBm/chain (Max) BT: < 10 dBm |
| Singal radio transmit power [dBm] | 2.4G: -10 dBm to 24 dBm/chain 5G: -10 dBm to 24 dBm/chain |
| MTBF [year] | year60.2 |
| MTTR [hour] | hour0.5 |
| Frequency stability [ppm] | +/-20 |
| 802.3bt power supply description | When the AP is powered by 802.3bt class 8, If the PoE OUT port is not used, no function is restricted. In standard dual-radio or three-radio mode, the 2.4 GHz radio supports 8x8:4 MIMO and a maximum of 20 MHz bandwidth. If the PoE OUT port (supporting only 802.3af) is used, the 10GE electrical port and the SFP+ optical port work as combo ports, and when one of them is working, the other is unavailable. The GE electrical port is available. Other functions are not restricted. In standard dual-radio or three-radio mode, the 2.4 GHz radio supports 8x8:4 MIMO and a maximum of 20 MHz bandwidth. When the AP is powered by 802.3bt class 6, If the PoE OUT port is not used, Wi-Fi: The transmit power of radios is not affected.
Wired network port: The 10GE electrical port and the SFP optical port work as combo ports. When one of them is working, the other is unavailable. The GE electrical port is available. Other ports: The PoE OUT port is not used. If the PoE OUT port is used, Wi-Fi: The radio power is self-adapted.
Wired network port: The 10GE electrical port and SFP optical port work as combo ports. When one of them is working, the other is unavailable. The GE electrical port is available. Other ports: The PoE OUT port (supporting only 802.3af) is used. |
| 802.3at power supply description | Wi-Fi: The radio power is self-adapted.
Wired network port: The rate of the 10GE electrical port rate is reduced to GE or lower and works with the SFP+ optical port as combo ports. When one of them is working, the other is unavailable. The GE electrical port is not available. Other ports: The PoE OUT port is unavailable. |
1. More than 10 years of in-depth experience in the automotive field and technological innovation ability
2. Multi-brand, Full series. Achieve cooperation with many brands, and provide first-hand vehicle source.
3. The same demand, more abundant vehicle sources; the same product, more favorable price; the same price, shorter delivery time; the same delivery time, more convenient service
4. One-stop service. Vehicle export service capability, serve the whole process.
Q: How about your main products?
روابط سريعة
عنواننا
الطابق 5AF بالكامل، الغرفة 6F605، الطابق 30F بالكامل، مبنى xingguang Yingjing، رقم 119 طريق Shuiyin، منطقة Yuexiu، قوانغتشو.
جميع الحقوق محفوظة © 2024 للأمن. 