02354pdc Airengine5761-11ei(11ax Intrinsically Safe,Industrial-grade Wi-fi 6 Module,2+2 Dual Bands,External Antenna,Ble)
Basic information about the AirEngine 5761-11EI
| Item | Details |
|---|---|
| Description | AirEngine5761-11EI(11ax intrinsically safe, industrial-grade Wi-Fi 6 module, 2+2 dual bands, external antenna, BLE) |
| Part Number | 02354PDC |
| Model | AirEngine 5761-11EI |
| subseries | AirEngine 5700 |
| First supported version | V200R022C00 |
|
1 |
Antenna port |
2 |
GE (optical ports) |
|
3 |
GE (electrical ports) |
4 |
RS485 |
|
5 |
DC 12V |
- |
- |
Ports on the AirEngine 5761-11EI
| Port | Connector Type | Description | Available Components |
|---|---|---|---|
| GE0 | SFP | Ethernet optical port, supporting 1000 Mbit/s and working with a matching optical transceiver |
Optical module |
| GE1 | RJ45 | Ethernet electrical port, supporting 10/100/1000 Mbit/s auto-sensing and used to connect to the wired Ethernet |
Network cable |
| GE2 | RJ45 | Ethernet electrical port, supporting 10/100/1000 Mbit/s auto-sensing and used to connect to the wired Ethernet |
Network cable |
| GE3 | SFP | Ethernet optical port, supporting 1000 Mbit/s and working with a matching optical transceiver |
Optical module |
| DC 12V | Phoenix terminal block | 12 V DC power supply |
Power cable |
| RS485 | Phoenix terminal block | RS485 serial port |
Console cable |
| LED | Dual-row plug-in connector | Connects to an external indicator board to implement the extended indicator functions. |
Flat cable |
Technical Specifications
| Item | Specification |
|---|---|
| Dimensions without packaging (H x W x D) [mm(in.)] | 45 mm x 200 mm x 200 mm (1.77 in. x 7.87 in. x 7.87 in.) |
| Dimensions with packaging (H x W x D) [mm(in.)] | 90 mm x 285 mm x 250 mm (3.54 in. x 11.22 in. x 9.84 in.) |
| Weight without packaging [kg(lb)] | 1.19 kg (2.62 lb) |
| Weight with packaging [kg(lb)] | 1.56 kg (3.44 lb) |
| Storage | NAND Flash 512 MB |
| Console port | BLE console |
| Maximum power consumption [W] | 12.6 W |
| Maximum heat dissipation [BTU/hour] | 43 BTU/hour |
| Power supply mode | DC adapter |
| Number of power modules | 1 |
| Rated input voltage [V] | 12 V mining explosion-proof and intrinsically safe DC regulated power supply (overcurrent protection value ≥ 1.8 A) |
| Input voltage range [V] | 12 V ± 10% |
| Maximum PoE output power [W] | Not supported |
| Redundant power supply | Not supported |
| Types of fans | None |
| Number of fan modules | 0 |
| Maximum number of physical ports on the entire device |
GE (RJ45) x 2, 10M/100M/1000M auto-sensing GE optical (SFP) x 2 |
| Long-term operating temperature [°C(°F)] | –40°C to +70°C (–40°F to +158°F) (If the altitude is in the range of 1800 m to 5000 m, the temperature decreases by 1°C or 1.8°F every time the altitude increases by 300 m.) |
| Storage temperature [°C(°F)] | –40°C to +85°C (–40°F to +185°F) |
| Long-term operating relative humidity [RH] | 5% RH to 95% RH |
| Long-term operating altitude [m(ft.)] | –60 m to +5000 m (–196.85 ft to +16404.20 ft) |
| Atmospheric pressure [kPa] | 53kPa - 106kPa ETSI 300 019-2-3 |
| Ground | floating ground |
| Antenna port surge protection [KA] | N/A |
| BLE | BLE4.0 |
| Radio number | 2 |
| Operating frequency band |
|
| MIMO spatial streams |
Radio 0 (2.4 GHz): 2x2 Radio 1 (5 GHz): 2x2 |
| Wi-Fi standard |
2.4G: 802.11b/g/n/ax 5G: 802.11a/n/ac/ac Wave 2/ax |
| Radio interface | MCX |
| Antenna gain | Built-in BLE: 0 dBi |
| Maximum transmit power |
2.4G: 15 dBm/chain 5G: 15 dBm/chain (Each radio of the AP has two spatial streams, which correspond to four RF ports through the built-in power splitter. The preceding transmit power values are the transmit power of a single RF port after power splitting.) BLE: < 0 dBm |
| Singal radio transmit power [dBm] |
2.4G: -10 dBm to 15 dBm/chain 5G: -10 dBm to 15 dBm/chain The preceding power ranges are the power values after power splitting by the built-in power splitter. Each radio corresponds to four ports. |
| MTBF [year] | 152 year |
| MTTR [hour] | 2 hour |
| Frequency stability [ppm] | +/-20 |
| DC power supply description | In coal mine scenarios, it must be used with the specified mining explosion-proof and intrinsically safe power supply. |
1. More than 10 years of in-depth experience in the automotive field and technological innovation ability
2. Multi-brand, Full series. Achieve cooperation with many brands, and provide first-hand vehicle source.
3. The same demand, more abundant vehicle sources; the same product, more favorable price; the same price, shorter delivery time; the same delivery time, more convenient service
4. One-stop service. Vehicle export service capability, serve the whole process.
Q: How about your main products?
Our address
5AF Whole Floor, 6F605 Room, 30F Whole Floor, xingguang Yingjing Building, No. 119 Shuiyin Road, Yuexiu District, Guangzhou.
Sitemap